![print This page](/images/print.gif)
Flange Yokes
PART NUMBER | SERIES | PILOT TYPE | PILOT DIA. | BOLT CIRCLE DIA. | BOLT HOLE COUNT | BOLT HOLE DIA. | C/L TO FACE | SWING DIA. | JOINT ANGLE | NOTES | VEHICLE CLASS | BRAND |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3-2-1819![]() |
1410 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.240 | 0 | Square pattern, Ford trucks with hole in center. | LD | Spicer |
2-2-1379![]() |
1310 | F | 2.000 | 4.250 | 4 | 0.484 | 1.625 | 5.219 | 19 | Sq Bolt Pattern / Fits Ford cars (Mustang, T-Bird, and others), trucks Ranger and possible the Explorer. It also fits the Mazda pickup from 1996 and later. | LD | Spicer |
3-2-1619![]() |
1350 | F | 2.000 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | M12-1.75 holes, square pattern | LD | Spicer |
3302-1369![]() |
1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, used at rear end from early 90's and up. | LD | PTI |
3102-1379![]() |
1310 | F | 2.000 | 4.250 | 4 | 0.500 | 2.125 | 5.320 | PTI version is .500" taller then Dana 2-2-1379 | LD | PTI | |
T2-2-1369A![]() |
1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 45% Lighter | LD | PTI |
T3-2-1579A![]() |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 47% Lighter | LD | PTI |
3502-1579![]() |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance | LD | PTI |
4102-1819![]() |
1410 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.240 | 0 | Square pattern, Ford trucks with hole in center. | LD | Spicer |
3502-1619![]() |
1350 | F | 2.000 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | M12-1.75 holes, square pattern | LD | PTI |
3502-1580![]() |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern. This flange has a larger hole for pinion nut clearance | LD | PTI |