Parts by Type

print This page

Flange Yokes

Filters: BRAND = PTI, PILOT TYPE = F, BOLT HOLE COUNT = 4,
PART NUMBER SERIES PILOT TYPE PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE COUNT BOLT HOLE DIA. C/L TO FACE SWING DIA. JOINT ANGLE NOTES VEHICLE CLASS BRAND
3102-063 1310 F 0.630 3.938 4 0.489 2.000 4.880 Fits Jeep Commander/ Grand Cherokee at transmission LD PTI
3502-063 1350 F 0.630 4.330 4 0.500 1.875 5.285 Fits Transmission on Dodge Ram 1500 from 2015+, Square pattern LD PTI
1202-077 1251 F 0.704 3.576 4 0.471 2.000 4.536 0 Equinox/Torrent/Vue, pilot on small hole, OE flange cast for large hole LD PTI
1402-9048 1100 F 1.840 2.910 4 0.315 1.625 3.543 Metric 90mm/8mm LD PTI
3102-9048 1310 F 1.850 2.933 4 0.315 1.500 3.543 Metric 90mm/8mm LD PTI
1202-196 1251 F 1.968 3.550 4 0.425 1.900 4.520 0 LD PTI
1202-201 1251 F 1.991 3.555 4 0.427 1.935 4.490 0 Equinox, Saturn Vue, Square pattern LD PTI
P2-2-949 1330 F 2.000 3.500 4 0.484 1.625 4.469 0 Sq Bolt Pattern / Early version of 2-2-1369. Only difference is the bolt circle. LD PTI
3302-1369 1330 F 2.000 4.250 4 0.500 1.625 5.250 0 Square pattern, used at rear end from early 90's and up. LD PTI
3102-1379 1310 F 2.000 4.250 4 0.500 2.125 5.320 PTI version is .500" taller then Dana 2-2-1379 LD PTI
T2-2-1369A 1330 F 2.000 4.250 4 0.500 1.625 5.250 0 6061-T6 Forged Aluminum / 45% Lighter LD PTI
T3-2-1579A 1350 F 2.000 4.250 4 0.500 1.625 5.250 0 6061-T6 Forged Aluminum / 47% Lighter LD PTI
T2-2-949A 1330 F 2.000 3.500 4 0.484 1.625 4.469 0 6061-T6 Forged Aluminum / 37% Lighter LD PTI
3502-1579 1350 F 2.000 4.250 4 0.500 1.625 5.250 0 Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance LD PTI
P2-2-1049 1210 F 2.000 3.500 4 0.484 1.625 4.740 20 Sq Bolt Pattern / Fits up to early 90's Ford Ranger and Bronco II. LD PTI
3502-1619 1350 F 2.000 4.250 4 0.410 1.625 5.250 0 M12-1.75 holes, square pattern LD PTI
P2-2-939 1310 F 2.000 3.500 4 0.500 1.650 4.500 0 Square Bolt Pattern / Used on Ford car and truck applications 1990 and ealier. LD PTI
3302-949 1330 F 2.000 3.500 4 0.484 1.625 4.469 0 Square pattern LD PTI
3502-1580 1350 F 2.000 4.250 4 0.500 1.625 5.250 0 Square pattern. This flange has a larger hole for pinion nut clearance LD PTI
3502-1585 1350 F 2.000 4.750 4 0.500 1.750 5.250 0 Square pattern. 3502-1859 with WAS20295 for new F150s LD PTI
3302-1879 1330 F 2.162 3.937 4 0.489 1.930 4.960 0 Dodge, square LD PTI
3102-216 1310 F 2.162 4.520 4 0.489 2.000 5.310 Fits Jeep Commander/ Grand Cherokee at differential LD PTI
3502-216 1350 F 2.162 3.937 4 0.489 1.625 4.960 0 Dodge, Square LD PTI
3102-217 1310 F 2.162 3.937 4 0.489 2.082 Sq Bolt Pattern / Part has hole thru center. Bolt holes are equally spaced. Dodge .152 taller than Dana 2-2-1989 MAR18 NEW LD PTI
3302-1879-1 1330 F 2.162 3.937 4 0.489 1.625 4.960 0 Dodge 0.305" shorter then Dana 2-2-1879 LD PTI
3102-2244 1310 F 2.244 3.992 4 0.406 2.250 57mm pilot, rectangluar, 77.8mm x 65.3mm LD PTI
3502-221 1350 F 2.245 4.000 4 0.400 2.625 4.730 Sprinter thru 2006 LD PTI
3502-256 1350 F 2.559 4.250 4 0.500 1.618 5.250 0 Sq Bolt Pattern / Part has hole thru center LD PTI
3302-256 1330 F 2.559 4.250 4 0.500 1.644 5.320 0 LD PTI
3102-263 1310 F 2.630 4.330 4 0.475 2.060 5.320 0 DODGE FRONT FLANGE, sq pattern LD PTI
3502-261 1350 F 2.638 4.410 4 0.400 2.625 5.260 Sprinter from 2007, REC 2.825 x 3.385 LD PTI
N3-2-5107 1350 F 2.638 4.410 4 0.400 1.625 5.260 Shorter than PTI 3502-261 by 1.000", REC 2.825 x 3.385 LD PTI
4102-1709 1410 F 2.680 4.250 4 0.410 1.625 5.352 12 Sq Bolt Pattern / M12-1.75 Threaded, Fits Ford truck . Same as 3-2-1709 LD PTI
3502-1699 1350 F 2.680 4.250 4 0.410 1.625 5.250 0 Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. LD PTI
4102-1759 1410 F 2.680 4.250 4 0.500 1.620 5.352 12 SQ LD PTI
3502-280 1350 F 2.858 4.500 4 0.500 2.015 5.690 Used on 1996-2002 GM Full Size Vans.
 LD PTI
3102-50 1310 F 2.875 3.937 4 0.413 2.671 4.550 Bravada, CVJ conversion 115mm/100mm LD PTI
2102-50 1210 F 2.875 3.937 4 0.413 1.625 4.810 Bravada LD PTI
T3-2-1859A 1350 F 2.953 4.750 4 0.500 1.750 5.750 0 6061-T6 Forged Aluminum / 54% Lighter LD PTI
3502-1859 1350 F 2.953 4.750 4 0.500 1.750 5.750 0 Sq Bolt Pattern / Hole in center, Ford/GM apps, 9L3Z-4782-A LD PTI
4102-1839 1410 F 2.953 4.750 4 0.500 2.000 5.750 0 Sq Bolt Pattern / Hole in center LD PTI
4802-1869 1480 F 2.953 4.750 4 0.510 2.000 5.850 0 Sq Bolt Pattern / Hole in center LD PTI
N3R-2-8268 3R F 3.125 4.250 4 0.455 1.687 4.960 Saginaw Non-CV LD PTI