Center Bearings
PART NUMBER | BEARING ID | CENTER TO CENTER OF MOUNT HOLES | C/L TO BASE | APPLICATION | NOTES | VEHICLE CLASS | BRAND |
---|---|---|---|---|---|---|---|
2880-85 | 5mm Pad, 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "1404101181" |
LD | PTI | ||||
2280-50 | 0.985 | 6.693 | 0.347 | ACURA MDX/ HONDA PILOT | LD | PTI | |
1380-10 | 1.181 | 5.750 | Toyota | Pickup 4X2 (79-83) | LD | PTI | |
1680-45 | 1.181 | 8.000 | Dodge Journey | LD | PTI | ||
2880-43 | 1.181 | 6.250 | 0.375 | Mercedes | 5.00mm mounting tab thickness | LD | PTI |
2580-13 | 1.181 | 7.375 | Audi/VW | LD | PTI | ||
2880-61 | 1.181 | 11.125 | 03-06 Chrysler Pacifica | Front CB on 3pc shaft | LD | PTI | |
2880-62 | 1.181 | 11.125 | 07-08 Chrysler Pacifica | Front CB on 3pc shaft | LD | PTI | |
2580-11 | 1.181 | 11.102 | 4.921 | AUDI A8/ S8 | LD | PTI | |
2580-12 | 1.181 | 8.937 | 4.331 | AUDI A4/ A5/ S5 | LD | PTI | |
2580-68 | 1.181 | 6.625 | 0.000 | PORSCHE PANAMERA | LD | PTI | |
2880-33 | 1.181 | 4.870 | MERCEDES CLK (07-09) | #4 Pad. 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "230400181" |
LD | PTI | |
3180-32 | 1.181 | 6.300 | Range Rover (06-12) | LD | PTI | ||
2880-56 | 1.181 | 8.125 | 2.375 | MB S550 (07-11) | #2 Pad, 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "2114100781" |
LD | PTI |
2880-21 | 1.181 | MB CLK500 (03-06) | #4 Pad. 6006LLU must be placed with housing and rubber inside white box | LD | PTI | ||
1680-65 | 1.181 | 7.750 | 2.750 | Mitsubishi Outlander | with rubber bushings | LD | PTI |
2880-28 | 1.181 | 6006LLU must be placed with housing and rubber inside white box. Housing ONLY part # "2044100981" | LD | PTI | |||
1680-66 | 1.181 | 1.375 | 1.375 | 03-05 Evo Lancer | Front on 3PC shaft, centerline to base measured from "L" side to middle, marked "F" | LD | PTI |
1680-67 | 1.181 | 6.250 | 1.375 | 2006 Evo Lancer | Front on 3PC shaft, welded on bracket with studs, marked "F" | LD | PTI |
1680-68 | 1.181 | 6.000 | 2.250 | 03-06 Evo Lancer | Rear on 3PC shaft, centerline to base measured from "L" side to middle, marked "R" | LD | PTI |
2780-67 | 1.181 | 5.600 | BMW 330i 19-22, 330iX 18-22, 430i 22-23, 530e 17-23, 530eX 17-23, 530i 17-23, 530iX 17-23, 540iX 17-23, 640iX 18-20, 740eX 17-18, M340iX 19-22, M440iX 22-23 | marked "TOP", mounting tabs have machined notches on top side, 2 bumps at 5 and 7 o'clock on older OE version | LD | PTI | |
2780-68 | 1.181 | 5.669 | BMW 3, 4, 5, 7 | marked "TOP" | LD | PTI | |
2880-99 | 1.260 | Mercedes | 32mm (ID) x 55mm x 13mm Ball Bearing | LD | PTI | ||
2880-24 | 1.260 | 4.875 | MB SL600, SL65 | #7 pad, comes with 2880-99 bearing (32mm ID) in box, see "2034102181" for just housing without bearing. | LD | PTI | |
2780-99 | 1.378 | 35mm (ID) x 55mm x 13mm Ball Bearing | LD | PTI | |||
3580-99 | 1.378 | 1350 | 3580-34 bearing with dust caps, might fit other applications | LD | PTI | ||
2780-66 | 1.378 | 5.600 | BMW 2016-2019 540i, 740i, 750i RWD, Toyota Supra and BMW | marked "TOP", mounting tabs have machined notches on top side, 2 bumps at 5 and 7 o'clock, | LD | PTI | |
2780-69 | 1.378 | 5.669 | Toyota Supra and BMW | marked "TOP" | LD | PTI |