Flange Yokes
PART NUMBER | SERIES | PILOT TYPE | PILOT DIA. | BOLT CIRCLE DIA. | BOLT HOLE COUNT | BOLT HOLE DIA. | C/L TO FACE | SWING DIA. | JOINT ANGLE | NOTES | VEHICLE CLASS | BRAND |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3-2-1619 | 1350 | F | 2.000 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | M12-1.75 holes, square pattern | LD | Spicer |
T3-2-1579A | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 47% Lighter | LD | PTI |
3502-1579 | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance | LD | PTI |
3502-1619 | 1350 | F | 2.000 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | M12-1.75 holes, square pattern | LD | PTI |
3502-1580 | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern. This flange has a larger hole for pinion nut clearance | LD | PTI |
3502-1585 | 1350 | F | 2.000 | 4.750 | 4 | 0.500 | 1.750 | 5.250 | 0 | Square pattern. 3502-1859 with WAS20295 for new F150s | LD | PTI |
3502-216 | 1350 | F | 2.162 | 3.937 | 4 | 0.489 | 1.625 | 4.960 | 0 | Dodge, Square | LD | PTI |
3-2-1879 | 1350 | F | 2.559 | 4.250 | 4 | 0.500 | 1.618 | 5.250 | 0 | Sq Bolt Pattern / Part has hole thru center. | LD | Spicer |
3502-256 | 1350 | F | 2.559 | 4.250 | 4 | 0.500 | 1.618 | 5.250 | 0 | Sq Bolt Pattern / Part has hole thru center | LD | PTI |
3-2-1699 | 1350 | F | 2.680 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. | LD | Spicer |
3502-1699 | 1350 | F | 2.680 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. | LD | PTI |
3-2-1859 | 1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | Sq Bolt Pattern / Hole in center | LD | Spicer |
T3-2-1859A | 1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | 6061-T6 Forged Aluminum / 54% Lighter | LD | PTI |
3502-1859 | 1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | Sq Bolt Pattern / Hole in center, Ford/GM apps, 9L3Z-4782-A | LD | PTI |
68036718AB | 1350 | SERRATED | N/A | 3.950 | 4 | 0.430 | 2.375 | 4.680 | 0 | SQ Pattern | LD | PTI |
3502-391 | 1350 | SERRATED | N/A | 3.950 | 4 | 0.430 | 2.375 | 4.680 | 0 | SQ Pattern, 2.784" x 2.784" | LD | PTI |