Flange Yokes
PART NUMBER | SERIES | PILOT TYPE | PILOT DIA. | BOLT CIRCLE DIA. | BOLT HOLE COUNT | BOLT HOLE DIA. | C/L TO FACE | SWING DIA. | JOINT ANGLE | NOTES | VEHICLE CLASS | BRAND |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P2-2-949 | 1330 | F | 2.000 | 3.500 | 4 | 0.484 | 1.625 | 4.469 | 0 | Sq Bolt Pattern / Early version of 2-2-1369. Only difference is the bolt circle. | LD | PTI |
3302-1369 | 1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, used at rear end from early 90's and up. | LD | PTI |
3102-1379 | 1310 | F | 2.000 | 4.250 | 4 | 0.500 | 2.125 | 5.320 | PTI version is .500" taller then Dana 2-2-1379 | LD | PTI | |
T2-2-1369A | 1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 45% Lighter | LD | PTI |
T3-2-1579A | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 47% Lighter | LD | PTI |
T2-2-949A | 1330 | F | 2.000 | 3.500 | 4 | 0.484 | 1.625 | 4.469 | 0 | 6061-T6 Forged Aluminum / 37% Lighter | LD | PTI |
3502-1579 | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance | LD | PTI |
P2-2-1049 | 1210 | F | 2.000 | 3.500 | 4 | 0.484 | 1.625 | 4.740 | 20 | Sq Bolt Pattern / Fits up to early 90's Ford Ranger and Bronco II. | LD | PTI |
3502-1619 | 1350 | F | 2.000 | 4.250 | 4 | 0.410 | 1.625 | 5.250 | 0 | M12-1.75 holes, square pattern | LD | PTI |
P2-2-939 | 1310 | F | 2.000 | 3.500 | 4 | 0.500 | 1.650 | 4.500 | 0 | Square Bolt Pattern / Used on Ford car and truck applications 1990 and ealier. | LD | PTI |
3302-949 | 1330 | F | 2.000 | 3.500 | 4 | 0.484 | 1.625 | 4.469 | 0 | Square pattern | LD | PTI |
3502-1580 | 1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern. This flange has a larger hole for pinion nut clearance | LD | PTI |
3502-1585 | 1350 | F | 2.000 | 4.750 | 4 | 0.500 | 1.750 | 5.250 | 0 | Square pattern. 3502-1859 with WAS20295 for new F150s | LD | PTI |